Versatool's patented overhead system contacts the workpiece when desired
 for more cutting control than any other system!


ShopMight Panel Unit   VersaTool Table Rails 
(click on images for more info)


50" Panel Saw & Router Kit

We will supply you with all the power tool mounting hardware you need to make your own vertical Panel Saw. The panel saw kit includes; two 68" long rails (aluminum alloy extrusion) , which will give you a 52” crosscut and cross rout capability as well as ripping width. Your kit also comes with four 3/4" x 6" threaded uprights pins, with a 15" carriage.   

One carriage size fits all circular saws and routers. 
The CR150 carriage is 15" square. Extra carriages can be purchased for $90.

The PS150 kit is $400US.

 

 

60" Panel Saw & Router Kit

This kit is designed for 5'x10' MDF sheets, and includes... two 78" long rails, which will give you a 62” crosscut and cross rout capability as well as ripping, along with four 3/4" x 6" threaded uprights, with two carriage stops and one 15" saw or router carriage

 

The PS160 kit is $430US.  

 

 

 




For answers to specific any questions you might have, please call 1-800-466-6044.


A third rail can be added for $180. This will allow the use of two power tools mounted side by side, for production work, or just easier use. Additional carriages are listed above.

Add $160 for 78

If you require further information, please email or call us...

info3@versatool.com

 

Build your own panel saw stand using the design shown on this page. The plans are downloadable free.

 

Click here to order free plans

 

Once you've built a similar structure you can use our guide rails and carriage to build a better panel saw and save$.

 


Click here to see the new ShopMight WoodWorkCenter


PanelUnit.jpg (86192 bytes)

 

 

 

[Home] [Product Info] [Free Plans] [Ordering Info]

Copyright © 1996 - 2009 - US Patent # 5,647,420 - Other Patents Pending
Versatool is our registered Trademark.